RV Suspension

Disc brake assembly g5 10" 5 lug

Model #: K71-G00-42
All aluminum caliper: 380 series, sheds heat five times faster than cast iron calipers. ceramic pads: floating ceramic pads with stainless steel backing plates. improved wear over organic pads. lifetime limited warranty. stainless steel rotor with venting holes: new laser cut venting holes assist in faster cooling. slim design: allows short axle overhangs and provides direct brake line routing back to the axle. bi-metal piston: combines a stainless steel outer piston with an aluminum inner sleeve to shed braking heat fast. the stainless steel outer piston will not rust or corrode. oversize rubber boot: 50% thicker by design to provide a positive and faster piston withdrawal. rotating swivel connector: swivel brake line connector allows for convenient brake line placement. stainless steel caliper pins with oil impregnated bronze bushings: allows caliper to float freely and ensures proper alignment during installation and will not rust or corrode. vented caliper housing: improves heat dissipation and decreases pad wear. one piece stainless steel bleeder valve with teflon coating: will not corrode and allows for easier bleeding of the brake system. square o-ring with slant edge: helps retract pistons away from the rotor when fluid pressure is released. provides better protection from contamination of brake fluid. for 13", 14" or 15" wheels, replaces 10" drum brakes. bearings: 1 1/16x 1 3/8. hub capacity: 1,750#. galvx finish. bolt pattern: 5 on 4.5". 3,500# axle.